Feed machine is known as feed pellet machine
- Structure and working principle
Feed pellet machine the main structure of the feed machine consists of feeder, modulator, granulator, lubrication system, etc. The working process requires no more than 15% of the mixed powder. It enters the feeding dragon from the silo. By adjusting the speed of the infinitely variable speed motor, the appropriate material flow rate is obtained, and then enters the conditioning process, which is stirred and mixed with steam through the paddle rod. After conditioning, the temperature of the powder can reach 64-84℃ and the humidity reaches 14-16%. Then it passes through the chute and finally enters the pressing chamber for granulation.
- Classification
According to the type of mold, feed pellet machines can be divided into: ring-die feed pellet machines, flat-die feed pellet machines, and roller feed pellet machines; according to uses, they can be divided into: pig feed pellet machines, rabbit feed pellet machines, poultry feed pellet machines, Fish feed pellet machines, small household feed pellet machines, etc.; according to production, they can be divided into: corn straw feed pellet machines, wheat bran feed pellet machines, wood chip pellet machines, various feed pellet machines, with different appearance and production methods. To classify.
- Conditions for use of feed pellet machine
1) The feed pellet machine should be installed indoors or in a shed, and the ambient temperature is 5-40°C.
2) The process should match the equipment before and after the granulator.
3) The working voltage should be stable, with a deviation not greater than ±5%.
4) The moisture content of the powder before entering the machine should not exceed 15%.
5) The pressure and temperature of the supplied steam should comply with regulations.
- Precautions when starting up
For unfamiliar operators, you must first pull out the discharge handle outside the machine so that the initial material does not enter the pressing chamber but falls outside the machine. Then, when the steam content is appropriate, you can push it out of the machine. Discharge handle for normal pressing. After normal operation, the observation door of the unloading chute should be opened at any time to observe the quality of material conditioning and unloading conditions. If the material is found to be too dry or too wet and the current of the host suddenly rises and the host is overloaded, open the machine to discharge the material. handle to discharge materials outside the machine.
- Scope of application
The feed pellet machine is the host machine of the latest series of pressed pellet feed units developed by our factory. It is suitable for pressing pellets in feed factories, breeding plants, fertilizer plants, Chinese herbal medicines, chemicals, etc. The hourly output of pellets is 0.5-10 tons. It can be used with various Suitable for powdery materials. Its product performance is at the forefront of domestic and foreign counterparts.